メーカ・ベンダ名
玄人志向
型番
IEEE1394B-CB
製品URL
http://www.kuroutoshikou.com/products/1394/1394b-cbfset.html
それは何か(I/F, storage, DVcam, camera, printer, scanner, other)
I/F
動作するか(Yes,No,Patch)
Yes
謝辞に名前を載せても良いか(Yes,No)
Yes
uname -rms
FreeBSD 5.3-RELEASE i386
dmesg
<![CDATA[
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Thu Feb 3 08:22:54 JST 2005
kaz@milk.kobe1995.jp:/usr/src/sys/i386/compile/SMP
ACPI APIC Table: <GBT AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) MP 1500+ (1333.39-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory = 805240832 (767 MB)
avail memory = 778227712 (742 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <GBT AWRDACPI> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x50e0-0x50ff,0x5000-0x50df,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <AMD 762 host to AGP bridge> port 0xc400-0xc403 mem 0xf7100000-0xf7100fff,0xe8000000-0xefffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 768 UDMA100 controller> port 0xb000-0xb00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 7.5 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ohci0: <OHCI (generic) USB controller> mem 0xf610a000-0xf610afff irq 19 at device 0.0 on pci2
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ums0: vendor 0x055d product 0x1030, rev 1.00/0.04, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
fwohci0: <Texas Instruments TSB12LV26> mem 0xf6100000-0xf6103fff,0xf6109000-0xf61097ff irq 16 at device 4.0 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:30:95:26:50:00:4a:56
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:30:95:00:4a:56
fwe0: Ethernet address: 02:30:95:00:4a:56
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
cbb0: <RF5C475 PCI-CardBus Bridge> mem 0xf6104000-0xf6104fff irq 17 at device 5.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fxp0: <Intel 82557 Pro/100 Ethernet> port 0xa000-0xa01f mem 0xf6000000-0xf60fffff,0xf7000000-0xf7000fff irq 18 at device 6.0 on pci2
miibus0: <MII bus> on fxp0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:a0:c9:1a:89:b5
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xc0000-0xc87ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ad0: 114473MB <ST3120026A/8.01> [232581/16/63] at ata0-master UDMA100
ata1-master: DMA limited to UDMA33, non-ATA66 cable or device
acd0: DVDR <HL-DT-ST DVDRAM GSA-4160B/A300> at ata1-master UDMA33
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s1a
cardbus0: Resource not specified in CIS: id=10, size=800
cardbus0: Resource not specified in CIS: id=14, size=4000
fwohci1: <Texas Instruments TSB82AA2> mem 0xf5000000-0xf5003fff,0xf5004000-0xf50047ff irq 17 at device 0.0 on cardbus0
fwohci1: OHCI version 1.10 (ROM=1)
fwohci1: No. of Isochronous channels is 4.
fwohci1: EUI64 00:01:08:00:00:00:00:fe
fwohci1: invalid speed 7 (fixed to 3).
fwohci1: Phy 1394a available S800, 3 ports.
fwohci1: Link S800, max_rec 4096 bytes.
firewire1: <IEEE1394(FireWire) bus> on fwohci1
fwe1: <Ethernet over FireWire> on firewire1
if_fwe1: Fake Ethernet address: 02:01:08:00:00:fe
fwe1: Ethernet address: 02:01:08:00:00:fe
fwe1: if_start running deferred for Giant
sbp1: <SBP-2/SCSI over FireWire> on firewire1
fwohci1: Initiate bus reset
fwohci1: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire1: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire1: bus manager 0 (me)
fwohci1: phy int
]]>fwcontrol
<![CDATA[
root# fwcontrol -u 1
1 devices (info_len=1)
node EUI64 status
0 00-01-08-00-00-00-00-fe 0
]]>camcontrol devlist -v
<![CDATA[
scbus0 on sbp0 bus 0:
< > at scbus0 target -1 lun -1 ()
scbus1 on sbp1 bus 0:
< > at scbus1 target -1 lun -1 ()
scbus-1 on xpt0 bus 0:
< > at scbus-1 target -1 lun -1 (xpt0)
]]>その他コメント
<![CDATA[
IEEE1394b(800Mbps) <-> CardBus PC-card です。
Ti TSB81BA3(PHY), Ti TSB82AA2(LYNX)
]]>reporter
中村和志＠神戸
戻るReturn