メーカ・ベンダ名
Fuji
型番
FinePix S2Pro
製品URL
それは何か(I/F, storage, DVcam, camera, printer, scanner, other)
camera
動作するか(Yes,No,Patch)
Yes
謝辞に名前を載せても良いか(Yes,No)
Yes
uname -rms
FreeBSD 5.2.1-RELEASE i386
dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a6c000.
Preloaded elf module "/boot/kernel/snd_via8233.ko" at 0xc0a6c26c.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0a6c31c.
Preloaded elf module "/boot/kernel/bktr.ko" at 0xc0a6c3c8.
Preloaded elf module "/boot/kernel/bktr_mem.ko" at 0xc0a6c474.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a6c524.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 1700+ (1473.96-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Features=0x383fbff
AMD Features=0xc0400000
real memory = 796852224 (759 MB)
avail memory = 764305408 (728 MB)
ACPI APIC Table:
ioapic0 irqs 0-23 on motherboard
bktr_mem: memory holder loaded
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: on motherboard
npx0: INT 16 interface
acpi0: on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00f7d60
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: on acpi0
acpi_button0: on acpi0
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
agp0: mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: at device 1.0 on pci0
pci1: on pcib1
pcib1: slot 0 INTA is routed to irq 16
pci1: at device 0.0 (no driver attached)
cbb0: irq 17 at device 9.0 on pci0
cardbus0: on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
fwohci0: mem 0xdfff8000-0xdfffbfff,0xdffff800-0xdfffffff irq 18 at device 10.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:30:95:26:50:00:4a:56
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: on fwohci0
fwe0: on firewire0
if_fwe0: Fake Ethernet address: 02:30:95:00:4a:56
sbp0: on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
bktr0: mem 0xdfcff000-0xdfcfffff irq 19 at device 11.0 on pci0
bktr0: Card has no configuration EEPROM. Cannot determine card make.
bktr0: Pinnacle/Miro TV, Temic NTSC tuner.
pci0: at device 11.1 (no driver attached)
uhci0: port 0xec00-0xec1f irq 21 at device 16.0 on pci0
usb0: on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: port 0xe800-0xe81f irq 21 at device 16.1 on pci0
usb1: on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: vendor 0x055d product 0x1030, rev 1.00/0.04, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
isab0: at device 17.0 on pci0
isa0: on isab0
atapci0: port 0xfc00-0xfc0f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcm0: port 0xe400-0xe4ff irq 22 at device 17.5 on pci0
pcm0:
rl0: port 0xe000-0xe0ff mem 0xdffff700-0xdffff7ff irq 18 at device 19.0 on pci0
rl0: Ethernet address: 00:20:ed:6f:e4:4a
miibus0: on rl0
rlphy0: on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
acpi_button1: on acpi0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: on ppc0
plip0: on ppbus0
lpt0: on ppbus0
lpt0: Interrupt-driven port
ppi0: on ppbus0
atkbdc0: port 0x64,0x60 irq 1 on acpi0
atkbd0: flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: cmd 3 failed at out byte 1 of 3
orm0: at iomem 0xcc000-0xccfff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
sc0: at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1473960268 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc62ae560
ad0: 152627MB [310101/16/63] at ata0-master UDMA133
acd0: CDRW at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
fwohci0: BUS reset
fwohci0: node_id=0x0800ffc0, gen=14, Bus reset failure
fwohci0: node_id=0xc800ffc1, gen=14, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc1, gen=15, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
firewire0: New S400 device ID:00c02d81090005b9
GEOM: create disk da0 dp=0xc625d450
da0 at sbp0 bus 0 target 1 lun 0
da0: Removable Simplified Direct Access SCSI-2 device
da0: 50.000MB/s transfers, Tagged Queueing Enabled
da0: 1027MB (2104704 512 byte sectors: 255H 63S/T 131C)
fwcontrol
3 devices (info_len=3)
node EUI64 status
1 0x0030952650004a56 0
0 0x00c02d81090005b9 1
camcontrol devlist -v
scbus0 on sbp0 bus 0:
at scbus0 target 1 lun 0 (pass1,da0)
< > at scbus0 target -1 lun -1 ()
scbus-1 on xpt0 bus 0:
< > at scbus-1 target -1 lun -1 (xpt0)
その他コメント
中に差しているメディアが見えている。
reporter
中村和志@神戸
戻るReturn