メーカ・ベンダ名
mathey
型番
iPockey MIPF-25FB
製品URL
それは何か(I/F, storage, DVcam, camera, printer, scanner, other)
storage
動作するか(Yes,No,Patch)
Yes
謝辞に名前を載せても良いか(Yes,No)
Yes
uname -rms
FreeBSD 4.9-RELEASE i386
dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #1: Thu Sep 2 05:09:10 JST 2004
root@dandy.kobe1995.jp:/usr/obj/usr/src/sys/NOTE4
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel Celeron (646.83-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff
real memory = 335413248 (327552K bytes)
config> di aic0
config> di aha0
config> di adv0
config> en apm
config> q
avail memory = 320872448 (313352K bytes)
Preloaded elf kernel "kernel" at 0xc04fd000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04fd09c.
Preloaded elf module "snd_ds1.ko" at 0xc04fd0ec.
Preloaded elf module "snd_pcm.ko" at 0xc04fd18c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00f0460
apm0: on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: on motherboard
npx0: INT 16 interface
pcib0: on motherboard
pci0: on pcib0
agp0: mem 0xd0000000-0xdfffffff at device 0.0 on pci0
pcib1: at device 1.0 on pci0
pci1: on pcib1
pci1: at 0.0 irq 11
isab0: at device 5.0 on pci0
isa0: on isab0
atapci0: port 0xfff0-0xffff at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: port 0xff80-0xff9f irq 11 at device 5.2 on pci0
usb0: on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: port 0x4070-0x407f irq 9 at device 5.3 on pci0
intpm0: I/O mapped 4070
intpm0: intr IRQ 9 enabled revision 0
smbus0: on intsmb0
smb0: on smbus0
intpm0: PM I/O mapped 4000
fxp0: port 0xff40-0xff7f mem 0xeffc0000-0xeffdffff,0xeffff000-0xefffffff irq 11 at device 8.0 on pci0
fxp0: Ethernet address 00:10:a4:90:7b:49
inphy0: on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: (vendor=0x115d, dev=0x00d4) at 8.1 irq 11
pci_cfgintr_linked: linked (60) to hard-routed irq 11
pci_cfgintr: 0:11 INTA routed to irq 11
pcic0: irq 11 at device 11.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
pccard0: on pcic0
pci_cfgintr_linked: linked (61) to hard-routed irq 11
pci_cfgintr: 0:11 INTB routed to irq 11
pcic1: irq 11 at device 11.1 on pci0
pcic1: PCI Memory allocated: 0x88001000
pccard1: on pcic1
pcm0: port 0xfebc-0xfebf,0xfec0-0xfeff mem 0xefdf0000-0xefdf7fff irq 11 at device 12.0 on pci0
pcm0:
fwohci0: mem 0xefde8000-0xefdebfff,0xefdef800-0xefdeffff irq 11 at device 15.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:00:39:00:00:02:af:08
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: on fwohci0
if_fwe0: on firewire0
if_fwe0: Fake Ethernet address: 02:00:39:02:af:08
sbp0: on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
orm0: at iomem 0xc0000-0xcbfff,0xcc000-0xcffff,0xe8000-0xebfff on isa0
pmtimer0 on isa0
fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: at port 0x60,0x64 on isa0
atkbd0: flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: on ppbus0
lpt0: on ppbus0
lpt0: Interrupt-driven port
ppi0: on ppbus0
ad0: 19077MB [38760/16/63] at ata0-master UDMA33
acd0: CD-RW at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
fwohci0: BUS reset
fwohci0: node_id=0x8000ffc0, gen=3, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
firewire0: root node is not cycle master capable
firewire0: bus manager 0 (me)
fwohci0: BUS reset
fwohci0: node_id=0x8000ffc0, gen=3, non CYCLEMASTER mode
fwohci0: txd err= 0 No stat
fw_xfer_done: pending
firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
firewire0: root node is not cycle master capable
firewire0: bus manager 0 (me)
fw_attach_dev: 1 pending handlers called
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc1, gen=4, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
firewire0: New S400 device ID:00d04b0000005289
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc1, gen=5, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
fwohci0: BUS reset
fwohci0: node_id=0x0000ffc0, gen=9, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0000ffc0, gen=10, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0000ffc0, gen=11, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0000ffc0, gen=12, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0000ffc0, gen=13, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0000ffc0, gen=14, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0000ffc0, gen=15, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0000ffc0, gen=16, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0000ffc0, gen=17, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0000ffc0, gen=18, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0000ffc0, gen=19, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0000ffc0, gen=20, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0000ffc0, gen=21, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0000ffc0, gen=22, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0x0000ffc0, gen=23, Bus reset failure
fwohci0: phy int
fwohci0: phy int
fwohci0: node_id=0x0000ffc0, gen=24, Bus reset failure
fwohci0: node_id=0x0000ffc0, gen=25, Bus reset failure
fwohci0: phy int
fwohci0: node_id=0xc000ffc0, gen=25, CYCLEMASTER mode
fwohci0: txd err= 0 No stat
fw_xfer_done: pending
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fw_attach_dev: 1 pending handlers called
fwohci0: txd err= 3 miss Ack err
sbp0:0:0 management ORB timeout
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc1, gen=27, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc1, gen=27, CYCLEMASTER mode
fwohci0: txd err= 0 No stat
fw_xfer_done: pending
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
fw_attach_dev: 1 pending handlers called
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc1, gen=28, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
da0 at sbp0 bus 0 target 0 lun 0
da0: Fixed Simplified Direct Access SCSI-4 device
da0: 50.000MB/s transfers, Tagged Queueing Enabled
da0: 38154MB (78140160 512 byte sectors: 255H 63S/T 4864C)
WARNING: driver fw should register devices with make_dev() (dev_t = "#fw/0")
fwcontrol
2 devices (info_len=2)
node EUI64 status
1 000039000002af08 0
0 00d04b0000005289 1
camcontrol devlist -v
scbus0 on sbp0 bus 0:
at scbus0 target 0 lun 0 (da0,pass0)
< > at scbus0 target -1 lun -1 ()
scbus-1 on xpt0 bus 0:
< > at scbus-1 target -1 lun -1 (xpt0)
その他コメント
2.5"HDDをIEEE1394接続する、Bus Poweredなポケットサイズのケースです。
reporter
中村和志@神戸
戻るReturn