メーカ・ベンダ名

Princeton

型番

Jet Drive PEC-35IU

製品URL

http://www.princeton.co.jp/product/pc/jetdrive35.html

それは何か(I/F, storage, DVcam, camera, printer, scanner, other)

storage

動作するか(Yes,No,Patch)

Yes

謝辞に名前を載せても良いか(Yes,No)

Yes

uname -rms

FreeBSD 5.4-RELEASE-p5 i386

dmesg

Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE-p5 #6: Thu Jul 21 12:24:32 JST 2005 root@***.*******.jp:/usr/obj/usr/src/sys/*** Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (999.67-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 805240832 (767 MB) avail memory = 782409728 (746 MB) npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard pci0: <PCI bus> on pcib0 agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd4000000-0xd5ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 drm0: <Matrox G400/G450 (AGP)> mem 0xd1000000-0xd17fffff,0xd0000000-0xd0003fff,0xd6000000-0xd7ffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xd4000000 32MB info: [drm] Initialized mga 3.1.0 20021029 on minor 0 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C596B UDMA66 controller> port 0xc000-0xc00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 10 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered fwohci0: <VIA Fire II (VT6306)> port 0xc800-0xc87f mem 0xd9001000-0xd90017ff irq 5 at device 15.0 on pci0 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:11:06:00:ad:00:4f:d6 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: xx:xx:xx:xx:xx:xx fwe0: Ethernet address: xx:xx:xx:xx:xx:xx fwe0: if_start running deferred for Giant fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xcc00-0xcc7f mem 0xd9000000-0xd900007f irq 5 at device 17.0 on pci0 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: xx:xx:xx:xx:xx:xx pcm0: <CMedia CMI8738> port 0xd000-0xd0ff irq 9 at device 18.0 on pci0 puc0: <Avlab Low Profile PCI 4 Serial> port 0xe000-0xe007,0xdc00-0xdc07,0xd800-0xd807,0xd400-0xd407 irq 11 at device 20.0 on pci0 sio4: <Avlab Low Profile PCI 4 Serial> on puc0 sio4: type 16550A sio5: <Avlab Low Profile PCI 4 Serial> on puc0 sio5: type 16550A sio6: <Avlab Low Profile PCI 4 Serial> on puc0 sio6: type 16550A sio7: <Avlab Low Profile PCI 4 Serial> on puc0 sio7: type 16550A orm0: <ISA Option ROMs> at iomem 0xc8000-0xcbfff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) speaker0: <PC speaker> at port 0x61 on isa0 unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0400> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) Timecounters tick every 10.000 msec ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to deny, logging unlimited ad0: 38166MB <ST340014A/3.06> [77545/16/63] at ata0-master UDMA66 ad1: 58644MB <IC35L060AVV207-0/V22OA66A> [119150/16/63] at ata0-slave UDMA66 acd0: CDROM <FX4831T/R02E> at ata1-master UDMA33 Mounting root from ufs:/dev/ad0s1a fwohci0: BUS reset fwohci0: node_id=0xc800ffc1, gen=2, CYCLEMASTER mode firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me) firewire0: bus manager 1 (me) fwohci0: BUS reset fwohci0: node_id=0xc800ffc1, gen=3, CYCLEMASTER mode firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me) firewire0: bus manager 1 (me) firewire0: New S400 device ID:0001d20e0097014d da0 at sbp0 bus 0 target 0 lun 0 da0: <Princeto Jet Drive 35 0102> Fixed Simplified Direct Access SCSI-4 device da0: 50.000MB/s transfers da0: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C)

fwcontrol

2 devices (info_len=2) node EUI64 status 1 00-11-06-00-ad-00-4f-d6 0 0 00-01-d2-0e-00-97-01-4d 1

camcontrol devlist -v

scbus0 on sbp0 bus 0: <Princeto Jet Drive 35 0102> at scbus0 target 0 lun 0 (da0,pass0) < > at scbus0 target -1 lun -1 () scbus-1 on xpt0 bus 0: < > at scbus-1 target -1 lun -1 (xpt0)

その他コメント

3.5inch ハードディスクケース (USB 2.0/1.1 & IEEE 1394 モデル) ただし、sysctl 変数 kern.cam.scsi_delay で設定する、SCSI バスリセット 後のデバイス認識までの待ち時間が初期値の 15000ms では足りない場合が あります (ときどきディスクデバイスを認識した直後に panic する)。 時間を 20000 にしたところ、どうやら panic はしないようです。

reporter

倉品英行 -- rushani
戻るReturn